*COMPLETE Ultimate 24 Wheel Builder's Kit - 4 Wheels (Front & Rear) PRINTS INCLUDED!
PLEASE READ: THIS IS A BUILDER’S KIT THAT REQUIRES SOME CRAFTSMANSHIP TO COMPLETE. (though I will build them for you for a small fee)
FRONT WHEELS - Unique, bearing mounted, (non)rotating weight hanger. Low CG and ideal front weight bias.
REAR WHEELS - Omits the weight hanger in favor of lighter weight and keeps front weight bias.
Hangers will accommodate 7 tungsten cubes per side. Ten cubes are included (5 per side, 46g total) because 7 cubes may add too much front weight bias on lighter weight vehicles. Additional cubes can be purchased individually if you want to add up to 4 more cubes (2 per side, 18g additional)
Printed parts are ultra high qualty Multi-Jet-Fusion MJF Nylon that are vapor polished and look like production, smooth, injection molded parts. No print layer lines visible. The smoothing process adds a hard outer layer for increased durability. (Note: The printed parts price reflects the high quality nature and are not marked up. I offer them at my cost to make it easier if you don't have access to a 3D printer)
*Beadlock Screws are NOT included to give you options. Silver or Black, flush or traditional. Customize the way you like!
Screws are M1.6 (most SCX24 bolts are M1.4)
Countersunk bead lock bolts cost more because I add it by hand! Alternatively, you can do it with this bit: Carbide Cutter
Watch Assembly Video HERE
A print file for all neccessary plastics and ALL Wheel Face Options will be e-mailed after purchase, free of charge.
INCLUDES
- 8 Carbon Beadlock Rings
- 4 Carbon Center Spacers
- 4 6061-T6 Aluminum Hex Adapters/Bearing Carriers, Black Anodized
- 2 Rubber Sealed Bearings
- 2 O-Ring Spacers
- 10pcs Tungsten Cubes (5 per side) - can hold up to 7 per side
- 2 Alignment Disks w/Hardware (fits Meus knuckles, other knuckles may require modification)
- 24pcs M1.6x8 Silver Hex Adapter Mounting Bolts
- 48pcs Beadlock Nuts - M1.6 with narrow 2.5mm flats
PRINTED PARTS INCLUDED - MJF Nylon, Vapor Smoothed
- 2 Tungsten Hangers
- 4 Wheel Faces (pick the style below)
- 4 Backing Faces
Finished Weight per Pair:
Front: 102 g/pr
Rear: 32 g/pr
NEEDED TO COMPLETE
Beadklock Hardware
48pcs M1.6 Beadlock Bolts (5-6mm length depending on tire sidewall thickness) Silver or Black, Socket Head or Flat head
BE SURE fasteners do not protrude inward past the beadlock nuts and prevent rotation of the weight hanger
Tools and Supplies
- Double Sided Tape
- Plastic Glue
- Sandpaper
- Alcohol or Acetone
- Your Dad's killer set of tools
Here is an Amazon Shopping List for Supplies CLICK HERE
Tires (not included) Recommended 68mm or larger diameter tires.
INJORA 1.3" XHX Pin Tires 72 * 24mm, S5 Compound CLICK HERE
INJORA 1.3" Tires S5 Cling On Tires 70 * 26mm CLICK HERE
Inserts There is NOT an off-the-shelf foam or printed insert for these tires. One option is any Crawler Innovations 1/10 Scale foam with “Tuning Rings” included. The tuning ring is a thin out layer of foam, about ¼” thick, that can be cut to fit at least 4 wheels. Many other foams could be cut to fit, but that’s up to you to explore and tune! I recommend a softer from in the front and stiffer foam in the rear.
Foams can be ordered from A*Main Hobbies below. Soft only. This set will do 8 wheels.
https://alnk.to/cm0iJZG
Quality Guarantee & Returns
- Quality is guaranteed. If there is a print error or visible quality issue, we'll replace or refund it.
- Because the products are made to order, we do not accept general returns or sizing-related returns.