Ultimate 24 Wheels Builder's Kit - Weight Hanger Version (FRONT)
PLEASE READ: THIS IS A BUILDER’S KIT THAT REQUIRES 3D PRINTED PARTS (not included) AND SOME CRAFTSMANSHIP TO COMPLETE.
This set of wheels has the unique, bearing mounted, (non) rotating weight hanger and is typically used in the front. However it can be used in the rear for the ultimate low CG.
Optional Wheel Faces NOW INCLUDED. E-mail will be sent with print files.
Hangers will accommodate 7 tungsten cubes per side. Ten cubes are included (5 per side, 46g total) because 7 cubes may add too much front weight bias on lighter weight vehicles. Additional cubes can be purchased individually if you want to add up to 4 more cubes (2 per side, 18g additional)
Beadlock Screws are NOT included to give you options. Silver or Black, flush or traditional. Customize the way you like!
Countersunk bead lock bolts cost more because I add it by hand! Alternatively, you can do it with this bit: Carbide Cutter
Screws are M1.6 (most SCX24 bolts are M1.4)
Watch Assembly Video HERE
A Print File link for the plastics, and optional wheel faces will be sent after purchase, free of charge.
INCLUDES
- 4 Carbon Beadlock Rings
- 2 Carbon Center Spacers
- 2 6061 Aluminum Hex Adapters/Bearing Carriers, Black Anodized
- 2 Rubber Sealed Bearings
- 2 O-Ring Spacers
- 10pcs Tungsten Cubes (5 per side) - can hold up to 7 per side
- 2 Alignment Disks w/Hardware (fits Meus knuckles, other knuckles may require modification)
- 12pcs M1.6x8 Silver Hex Adapter Mounting Bolts
- 24pcs Beadlock Nuts - M1.6 with narrow 2.5mm flats)
Finished Weight per Pair: 102 g
NEEDED TO COMPLETE
3D Printed Parts - (print yourself or order from Jawstec)
- 2pcs Hub Face
- 2pcs Inner Beadlock Face
- 2pcs Bearing Carrier
Print files will be e-mailed after purchase.
Hardware
- 24pcs M1.6 Beadlock Bolts (5-6mm length depending on tire sidewall thickness) Silver or Black, Socket Head or Flat head
BE SURE fasteners do not protrude inward past the beadlock nuts and prevent rotation of the weight hanger
Tools and Supplies
- Double Sided Tape
- Plastic Glue
- Sandpaper
- Alcohol or Acetone
- Your Dad's killer set of tools
Here is an Amazon Shopping List for Supplies CLICK HERE
Tires (not included) Recommended 68mm or larger diameter tires.
INJORA 1.3" XHX Pin Tires 72 * 24mm, S5 Compound CLICK HERE
INJORA 1.3" Tires S5 Cling On Tires 70 * 26mm CLICK HERE
Inserts There is NOT an off-the-shelf foam or printed insert for these tires. One option is any Crawler Innovations 1/10 Scale foam with “Tuning Rings” included. The tuning ring is a thin out layer of foam, about ¼” thick, that can be cut to fit at least 4 wheels. Many other foams could be cut to fit, but that’s up to you to explore and tune! I recommend a softer from in the front and stiffer foam in the rear.
Quality Guarantee & Returns
- Quality is guaranteed. If there is a print error or visible quality issue, we'll replace or refund it.
- Because the products are made to order, we do not accept general returns or sizing-related returns.